Tag Archives: OctoPrint

OctoPrint installation on Orange PI PC – Autostart

After the installation of OctoPrint and CuraEngine in the previous article

OctoPrint Package Installation

we treat now the configuration of the 3d print server.

As first operation, we set up the automatic startup of OctoPrint.

Run the following commands

Edit the /etc/ defaults/octoprint file changing the pointing to the executable to start OctoPrint using vi

or nano

and edit the file from

to

taking into account also the different user being used.

Add the script to startup automatically OctoPrint

Start OctoPrint  with the command

Check that OctoPrint is active on port 5000 of the Orange PI PC by accessing the address

Rebooting the Orange PI PC, the OctoPrint server now starts automatically.

In the next article, Linux will be configured to connect to OctoPrint on the Http standard port, i.e. on  port 80.

OctoPrint installation on Orange PI PC – Python package installation

This article describes how to enable the Orange PI PC board to work as 3d printers network server.

A  software that provides this functionality is OctoPrint

OctoPrint

From the OctoPrint site we can download an image for Raspberry PI with the system already ready; in the case of the Orange PI PC we have  to install and configure OctoPrint on a Linux image.

You can also use a Linux image available for Orange PI PC and run the steps related to OctoPrint package installation, but you have to check the prerequisites for Octoprint python package installation.

We instead built for this article an image using the Armban scripts.

As a first step, prepare the micro sd card with an Armbian image. In the specific case, we’ll use a Debian Jessie image created using the Armbian script, as indicated on the link

Armbian building

and described also in a previous article

Building Armbian image for Orange PI PC

We followed these steps to build the Armbian image on Ubuntu Xenial 16.04; from  a Linux command shell

In the building options choose

armbianopipcfosWe selected the default kernel configuration

armbianopipckernelChoose an Orange PI PC board

armbianopipcboardWe used the mainline kernel

armbianopipcmlkerneland Debian Jessie as distribution

armbianopipcjessieWe built an image with desktop envinronment

armbianopipcjessiedeAfter this option, the script proceeds to the compilation. The generated image is Armbian_5.34_Orangepipc_Debian_jessie_next_4.13.12_desktop.img. This image can be downloaded from the link

Armbian image for Orange Pi PC

Start Armbian and create the user for the Jessie image; in this case we choose octoprint/password as user.

If necessary, reconfigure the keyboard with the command

and proceed to upgrade the system

If the system needs to be configured via a wireless connection, the connection must be active at startup. For this purpose in our case we used the Wicd daemon

Wicd Debian

Remove the network-manager package

This command uninstalls network-manager and network-manager-gnome.

Check that the wireless interface is not present in

/etc/network/interfaces

Proceed to Wicd installation

Check that the octoprint user is present in the netdev group

In our case it is already present, giving as a result

netdev-group

If not present, add it with the command

Start  wicd

Logon to the armbian graphic desktop and start the wireless configuration with the command

wicd-client

Configure and save the network connection from the graphical interface.

If you want the remote desktop follow the steps listed in the article

Remote desktop setup for Armbian on Orange PI PC

We can now install Octoprint. Follow the steps available at the link

OctoPrint installation on Linux

Install the prerequisites

Create under /opt the octoprint folder and assign the ownership  to octoprint

In a Linux shell command go to /opt/octoprint  folder and download the software

Run

Create the  .octoprint folder

Add  octoprint to the following groups  to manage the 3d printer using the USB port

Check  the correct installation by running the command

The OctoPrint server can be reached on port 5000 at the IP address of Orange PI PC

http://ipaddress:5000

octoprinttest

Install the Cura Engine at this point; place yourself in the octoprint user’s home and download the source package

Unpack the package

Go into  the unpacked folder

Run  the compilation with the command

The compiled software is located under the build folder

curaengineCreate the /opt /octoprint/cura folder and copy the CuraEngine file to this folder

The executable is now in the /opt/octoprint/cura folder and will be used later by OctoPrint.

In the next article we’ll treat how to configure OctoPrint’s automatic startup

OctoPrint Autostart